 |
GYXTС8S
MXT
Product Name | Figure 8 GYXTC8S type outdoor self supporting fiber optical cable(GYXTС8S) | Installation | Outdoor Aerial/overhead |
Application | Outdoor Aerial/overhead Cabling System | Fiber Type | Single Mode/G.652D/G.655/G.657A/multimode |
Cable Type | Aerial Unitube Loose Tube Cable | Jacket Material | LSZH/PE |
Jacket Color | Black Or As Requested | Fiber Number | 1/2/4/8/12 Cores |
OEM | Acceptable | Strength Member | Stranded Steel Wire Or FRP |
Product name | Figure 8 GYXTC8S type outdoor self supporting fiber optical cable(GYXTС8S) |
Introduction | GYXTC8S type optical cable is center pipe loosing jacket filling type,steel-PE adhesive jacket,8 font self undertaken type communication outdoor optical cable. |
Characteristics | 1. High tensile strength of stranded wires meet the requirement of self-supporting and reduce installation cost. 2. Good mechanical and temperature performance. 3. High strength loose tube that is hydrolysis resistant. 4. Special tube filling compound ensure a critical protection of fiber. 5. The following measures are taken to ensure the cable watertight: l Steel wire used as the central strength member l Loose tube filling compound l 100% cable core filling l APL moisture barrier |
Standards | Complies with standard YD/T 1155-2001 as well as IEC60794-1. |
Transport/Storage/Operating Temperature: -40℃ ~ +70℃
Installation Temperature: -40℃ ~ +70℃
Technical Parameters
Cable Code | Fiber Count | Tubes | Fillers | Cable Weight | Tensile Strength | Crush Resistance | Bending Radius |
(1.2x7 steel wire) | Long/Short term N | Long/Short term N/100mm | Dynamic/Static | ||||
kg/km(Ref) | mm | ||||||
GYTC8A-2~6Xn | 2~6 | 1 | 4 | 158 | According to the diameter of the Messenger Wire | 300/1000 | 10D/20D |
GYTC8A-8~12Xn | 8~12 | 2 | 3 | 158 | |||
GYTC8A-14~18Xn | 14~18 | 3 | 2 | 158 | |||
GYTC8A-20~24Xn | 20~24 | 4 | 1 | 158 | |||
GYTC8A-26~30Xn | 26~30 | 5 | 0 | 158 | |||
GYTC8A-32~36Xn | 32~36 | 6 | 0 | 167 | |||
GYTC8A-38~48Xn | 38~48 | 4 | 1 | 172 | |||
GYTC8A-50~60Xn | 50~60 | 5 | 0 | 172 |
Ordering Information
Rolled by wooden drums. 2km-3km per drum or other required.
2. Sheath mark
The following printing is applied at 1-meter intervals.
a. Supplier: MXT or as customer required
b. Standard Code(Product Type, Fiber Type, Fiber Count)
c. Year of manufacture: xxx
d. Length marking in meters
Product Name | Figure 8 GYXTC8S type outdoor self supporting fiber optical cable(GYXTС8S) | Installation | Outdoor Aerial/overhead |
Application | Outdoor Aerial/overhead Cabling System | Fiber Type | Single Mode/G.652D/G.655/G.657A/multimode |
Cable Type | Aerial Unitube Loose Tube Cable | Jacket Material | LSZH/PE |
Jacket Color | Black Or As Requested | Fiber Number | 1/2/4/8/12 Cores |
OEM | Acceptable | Strength Member | Stranded Steel Wire Or FRP |
Product name | Figure 8 GYXTC8S type outdoor self supporting fiber optical cable(GYXTС8S) |
Introduction | GYXTC8S type optical cable is center pipe loosing jacket filling type,steel-PE adhesive jacket,8 font self undertaken type communication outdoor optical cable. |
Characteristics | 1. High tensile strength of stranded wires meet the requirement of self-supporting and reduce installation cost. 2. Good mechanical and temperature performance. 3. High strength loose tube that is hydrolysis resistant. 4. Special tube filling compound ensure a critical protection of fiber. 5. The following measures are taken to ensure the cable watertight: l Steel wire used as the central strength member l Loose tube filling compound l 100% cable core filling l APL moisture barrier |
Standards | Complies with standard YD/T 1155-2001 as well as IEC60794-1. |
Transport/Storage/Operating Temperature: -40℃ ~ +70℃
Installation Temperature: -40℃ ~ +70℃
Technical Parameters
Cable Code | Fiber Count | Tubes | Fillers | Cable Weight | Tensile Strength | Crush Resistance | Bending Radius |
(1.2x7 steel wire) | Long/Short term N | Long/Short term N/100mm | Dynamic/Static | ||||
kg/km(Ref) | mm | ||||||
GYTC8A-2~6Xn | 2~6 | 1 | 4 | 158 | According to the diameter of the Messenger Wire | 300/1000 | 10D/20D |
GYTC8A-8~12Xn | 8~12 | 2 | 3 | 158 | |||
GYTC8A-14~18Xn | 14~18 | 3 | 2 | 158 | |||
GYTC8A-20~24Xn | 20~24 | 4 | 1 | 158 | |||
GYTC8A-26~30Xn | 26~30 | 5 | 0 | 158 | |||
GYTC8A-32~36Xn | 32~36 | 6 | 0 | 167 | |||
GYTC8A-38~48Xn | 38~48 | 4 | 1 | 172 | |||
GYTC8A-50~60Xn | 50~60 | 5 | 0 | 172 |
Ordering Information
Rolled by wooden drums. 2km-3km per drum or other required.
2. Sheath mark
The following printing is applied at 1-meter intervals.
a. Supplier: MXT or as customer required
b. Standard Code(Product Type, Fiber Type, Fiber Count)
c. Year of manufacture: xxx
d. Length marking in meters
